Copyright:nhacaiuytinMọi quyền được bảo lưu cho trang web chính thức © 2023 Shenzhen Rapid Direct Co., Ltd. All rights reserved.
RapidDirect provides a AI-powered, hassle-free online quotation platform that can help simplify your ordering and manufacturing process. Stop wasting time in emails, get interactive quotes with DFM analysis within seconds, optimize your orders immediately, compare your multiple quotes side by side, manage your orders in one place.
Standards | Metric Units | Imperial Units |
Maximum Part Size | 800×1000×400mm | 31.50×39.37×15.75in. |
Minimum Part Size | 2×2×2mm | 0.08×0.08×0.08in. |
Substrate Wall Thickness | From 0.5 to 3mm | From 0.20 to 0.12 in. |
Tolerance | +/- 0.025 mm | +/- 0.00098 in. |
Inserts | Inserts can be female and male. They both can improve a product’s appearance and utility. | |
Mold Validation | Provide T0, T1, T2 samples before mass production | |
Inspection and Certification Options | First Article Inspection, ISO 9001, ISO 13485 | |
Lead Time | From mold making to sample delivery: 15-45 business days |
Tool Steel: P20, H13, S7, NAK80, S136, S136H, 718, 718H, 738
Stainless Steel:
420, NAK80, S136, 316L, 316, 301, 303, 304Aluminum: 6061, 5052, 7075
UV absorbers | Colorants |
Flame retardants | Glass fibers |
Plasticizers |
Brass |
Stainless Steel |
Aluminum |
Note: You can learn more from our eBook on plastic materials.
Name | Description | Link |
Glossy | A grade finishes are made using a diamond buffing process and yield shiny and glossy surfaces on injection molded parts. | Learn More>> | |
Semi-glossy | B grade finishes use grit sandpaper to produce parts with a slightly rougher finish than grade A parts. Custom molded plastic parts that undergo B grade finishing have a matte surface texture. | ||
Matte | C grade finishes use grit sanding stones to produce a rough, uneven surface. Injection plastic parts that undergo C grade finishing have a matte surface texture. | Learn More>> | |
Textured | D grade finishes use grit and dry glass beads or oxide to produce a very rough textured finish. Depending on the type of material used, products can have a satin or dull finish. |
The staff at RapidDirect has assisted us in turning our ideas into finished parts for several years now. The process from conception to manufacturing has been smooth, thanks to their knowledge, skills, and “can-do” attitude. This is one of our most fruitful business partnerships because of RapidDirect’s emphasis on customer satisfaction.
RapidDirect works with leading manufacturers from different industries to support growing demands and streamline their supply chain. The digitalization of our custom injection molding services helps more and more manufacturers bring their idea to products.
Our mold-making process includes 6 steps:
Step 1: Production arrangement: Determine all of the requirements and arrange the production.
Step 2: DFM report analysis: Provide free but detailed production DFM report for further feasibility analysis.
Step 3: Production the mold: Put the mold into production and provide the Tooling Schedule form for the whole cycle for clients to check the process at any time.
Step 4: Free sample to test: Put the mold into production and provide the Tooling Schedule form for the whole cycle for clients to check the process at any time.
Step 5: Mass production:Client confirms the samples are qualified, then officially proceed with the subsequent production.
Step 6: Mold saving: Production is completed and delivered after quality inspection. Mold will be cleaned and properly stored for the next round of parts production.
Tolerance is very important, and if not correctly specified and controlled, assembling will fail. RapidDirect uses ISO 2068-c standard for injection molding tolerances unless tighter tolerance required.
No minimum order quantity, but the oder pricing will be more competitive if qty is higher.
After you place order, it takes about 35 days for mold designing and making, and more 3-5 days for molded parts production.
Generally, we generate the quote after our platform must have considered several factors, including the size of the component, mold complexity, number of injection cavities, materials, post-processing needs, etc.
Copyright:nhacaiuytinMọi quyền được bảo lưu cho trang web chính thức © 2024 Shenzhen Rapid Direct Co., Ltd. All rights reserved.
Copyright:nhacaiuytinMọi quyền được bảo lưu cho trang web chính thức © 2023 Shenzhen Rapid Direct Co., Ltd. All rights reserved.